Installation
What each product needs, and how to install and update it.
VectorMill for Rhino
There is no public package yet (see Downloads). The steps below are how the plug-in’s release package installs, and apply once you have one.
You need
- Operating system: Windows, 64-bit (x64)
- Host application: Rhino 8, version 8.35 or newer
- Installation: Through Rhino’s Package Manager. No administrator rights needed.
Install with Rhino’s Package Manager
-
Start Rhino and drag the package file, named like
vectormill-0.81.0-rh8_35-win.yak, from File Explorer onto the Rhino window. - When Rhino says the package is installed, close Rhino and start it again.
- Type VectorMill and press Enter. The VectorMill panels open, docked on the left, with the VectorMill toolbar and menu. VectorMillAbout shows the version.
If Rhino does not offer to install the file: close Rhino, open a Command Prompt in the folder holding the file, and run
"C:\Program Files\Rhino 8\System\Yak.exe" install --source "%CD%" vectormill then start Rhino.
Or install from the plug-in folder
-
Close Rhino. Copy the zip’s VectorMill folder somewhere it can stay, for example
C:\VectorMill. Rhino loads the plug-in from there every time. If the zip was downloaded, first right-click it, choose Properties and tick Unblock. -
Start Rhino, type PluginManager, click Install… and choose
VectorMill.Rhino.rhpin that folder. - Type VectorMill.
Use one way or the other on a computer, not both.
Update or uninstall
To update, install the newer package the same way (or, for the folder install, close Rhino and replace the folder’s files). Package Manager (type PackageManager) lists VectorMill under Installed, where you can uninstall it.
Your jobs are saved inside your .3dm files, and your tool library and machine setup are in
%LOCALAPPDATA%\VectorMill. An update does not overwrite them.
If the VibeCAM package is installed
Versions 0.44.1 to 0.51.0 were named VibeCAM. If Package Manager lists VibeCAM under Installed, uninstall it and restart Rhino before installing VectorMill, because both hold the same plug-in. Your jobs and settings are kept.
If the menu or panels are missing
Right after an update the VectorMill menu can be missing. It comes back by itself a few seconds after Rhino starts; if it does not, restart Rhino once more. To put the panels back where they started, run VectorMillPanels and choose ResetLayout.
VectorMill Manufacturing
VectorMill Manufacturing has no public build or installer yet. Installation steps will be added here with the first public build.
You need
- Operating system: Windows, 64-bit (x64)
- Host application: None. It runs on its own.
- Runtime: Included in the package. Nothing else to install.
Before the first cut
- Set up your machine and controller in Machine & post before posting anything.
- Enter your own tools. Feeds and speeds are yours to set: VectorMill does not recommend them.
- Air-cut every new program before cutting material.